Takex TAK-FS5000 Flame Sensor

Indoor/Outdoor UV with Relay Output

Description

Features

  • High Sensitivity with a 10m range
  • Comes with integrated bracket for aligning field of view
  • Wall or Ceiling Mount
  • Form C Relay Output
  • Integrated Sounder
  • 112 x 112 x 408mm
  • 10-30V DC

Specifications

Detection system

Ultraviolet rays detection
(detected wave length 180~260nm)

Detection area

Distance: 10m (33ft) max. (7cm flame)
Angle
· Horizontal: approx. 100 degrees (60 degrees downward)
· Vertical: approx. 75 degrees (15 degrees upward)
Adjustment range 
· Horizontal 25 degrees by base unit
· Vertical 30 degrees (4 steps) by sensor head

Sensitivity adjustment

Sensitivity: H (100%), L (50%) (selectable)
Detection timer: 1sec, 6sec, 15sec, 30sec (selectable)

Power supply

10V to 30VDC

Power consumption

35mA or less

Alarm output

Dry contact relay Form C (NO/NC)
Contact capacity: 30V (AC/DC) 0.5A, (resistance load)
Operation time: the following are selectable
· Detection time + off delay operation approx. 2sec to 1min
· Detection time + off delay operation approx. 5sec to 10min
Output operation: the following are selectable
· Same time as above continuous output
· Same time as above flashing output
Operation mode (day/night function):
· 5 lux night time operation
· ∞ lux day time operation (adjustment volume)

Alarm memory

Memory LED blinks for 3min., then lights for 47min. (auto-reset)

LED

Operation LED (red): synchronous dry contact relay
Memory LED (yellow): blinks for 3min and then lights

Wiring

Reed wiring
Power supply: 2 / dry contact: 3

Ambient temperature

-20°C to +50°C (-4°F to +122°F)

Installation

Indoor/outdoor

Weight

Approx. 550g (19.3oz)

Appearance

Sensor part: PC resin (white)
Bracket: AES resin (white)

Supplied accessories

· Tapping screw ∅6 x 30: 4pcs
· Tapping screw ∅4 x 8: 1pc
· Band: 1pc
· Area mask seal: 1pc

 

Blog Navigation