Detection system

Ultraviolet rays detection
(detected wave length 185~260nm)

Detection area

Distance: 10m (33ft) max. (7cm flame)
Angle
· Horizontal: approx. 100°
· Vertical: approx. 75° (15° upward/60° downward)
Adjustment range 
· Horizontal: 180°
· Vertical: downward 90°

Sensitivity adjustment

Sensitivity: L (50%) to H (100%) (selectable)
Detection timer: 1sec, 6sec, 15sec, 30sec (selectable)

Power supply

12VDC

Power consumption

Standby: 35mA or less
Activation: 500mA or less

Warning message output

Operation: output warning message when detecting flames (one-shot)
Message selection: 4 options available (selectable)
· English: Inflammable materials in this area. No naked flames.
· Spanish: Materiales inflamables en este area. Sin llamas.
· French: Produits inflammables pas de flammes nues.
· Italian: Attenzione zona a rischio incendi, non fumare e non usare flamme liebre.
Volume: mute – 100dB approx. (1m ahead)

External output

Dry contact relay Form C (NO/NC)
Contact capacity: 30V (AC/DC) 0.5A or less, (resistance load)
Output operation: off delay approx. 2 secs.

LED

Red LED: blinks during warning message output

Wiring

Reed wiring
Power supply: 2 / dry contact: 3

Installation method

Screw on flange

Ambient temperature

-20°C to +50°C (-4°F to +122°F)

Installation

Indoor/outdoor

Weight

Approx. 1kg (35oz)

Appearance

Sensor part: PC resin (black)
Bracket: PPO resin (black)

Supplied accessories

· Installation flange: 1pc
· Tapping screw 1 type ∅4×30(SUS): 4pcs 
· Area mask seal: 1pc