Lockwood Padde PD-100201-000 Strike

850kg, Monitored, PTL/PTO, 12V DC (SCEC)



  • Fully monitored – strike locked and door latched
  • Fail safe/fail secure changeable on site
  • High security
  • 4 Hour fire rating
  • 850kg holding force
  • 1 million cycles endurance rating
  • Cast stainless steel body
  • Stainless steel locking pins
  • SCEC Endorsed
  • Low Current consumption – Max 175ma @12Vdc
  • Solenoid rated for continuous use
  • Mounting kit supplied as standard


High traffic areas
Fire rated door sets
Open in/open out doors
Suitable for use with all access control systems

Standards and Compliance:
S3 (Security) Australian Lock Standard (AS4145.2.1993)
D3 (Durability) Australian Lock Standard (AS4145.2.1993)
BS 5872 Approved
Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1.2005 (Part 1: Fire resistant door sets)
Approved to UL1034 (highest level)
CE Approved
C-Tick Certified
SCEC endorsed for secure areas

Voltage: 12Vdc
Current: 175 mA @ 12Vdc
Solenoid: Solenoids are rated for continuous use.
Monitoring: Solenoid Monitor – 1 amp NO/NC microswitch, Door/Latch Monitor – 1 amp NO/NC microswitch
Holding Force: 850kg Static Strength Rating
Endurance: Cycle tested to 1,000,000 operations
Latch: Suitable for 15mm latch bolt with 3mm door gap
Environment: Operational temperature range -20°C to +60°C
Body: Solid Stainless Steel Construction
Keeper: Stainless Steel

Specification Statement:
The strike should be constructed of solid stainless steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. Monitoring must include independent door / latch & solenoid monitoring. The one strike must be changeable from fail safe to fail secure on site where required. The strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use. Certifications must include CE, C-Tick and 4 hr fire rating.

Blog Navigation